Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

$19.99
A lightweight and efficient mini pump with a locking T-handle for improved comfort and efficiency. - 25mm 6063-T6 aluminum sleeved barrel. - Reversible valve fits Schrader and Presta valves - Thumblock lever holds securely onto valve. - Locking T-handle improves ergonomics and provides better leverage when pumping. - 222mm total length - 120 PSI maximum pressure. - 121g
$27.99
A lightweight and efficient mini pump with a low-profile pressure gauge. T-handle provides improved comfort and efficiency. - 25mm 6063-T6 aluminum sleeved barrel. - In-line pressure gauge is accurate to within +/- 2 PSI. - Reversible valve fits Schrader and Presta valves - Thumblock lever holds securely onto valve. - Locking T-handle improves ergonomics and provides better leverage when pumping. - 222mm total length - 120 PSI maximum pressure. - 142g
$34.99
A lightweight workhorse pump. Perfect for family use in the garage or to throw in the back of the car. Inflation needles optimize potential non-bike uses. - Stable (235mm x 120mm) fiber composite base - 480mm Fiber composite barrel and pump shaft - Fiber composite handle - 85cm premium quality hose - Precision 51mm mid-mounted gauge - Headrush dual connector instantly fits Presta or Schrader valves - Inflation needles included - 120 PSI Maximum pressure, suitable for most bicycle types - 750g
$35.99
Efficient mid-high pressure mini pump with built-in extendable hose and easy-to-read dial pressure gauge. Achieves a higher maximum pressure with less effort. - 20mm 6063-T6 aluminum barrel. - 32mm dial gauge is accurate to +/- 2 PSI. - TIPFLIP reversible valve with alloy cap and alloy locking lever, fits Schrader and Presta valves. - 160mm extendable hose relieves stress on valve stems. - 268mm total length. - 110 PSI Maximum pressure. - Weight: 125g
$49.99
The ultimate pump that should be in every cyclists garage. Air stroke volume is optimized for high pressure but is great for general bicycle use as well. Inflation needles optimize potential non-bike uses. - Stable (240mm x 130mm) fiber composite base - 520mm steel barrel with high strength steel pump shaft - Dual compound premium handle - 110cm premium quality hose - Headrush dual valve connector with alloy valve caps - Precision 51mm mid-mounted gauge - Headrush connector instantly fits Presta or Schrader valves - inflation needles included - 160 PSI Maximum pressure, suitable for all bicycle types, but ideal for 60- 160 PSI tires - 1210g
$54.99
A durable and accurate shock pump. - Lightweight 6063-T6 aluminum construction. - 300 PSI maximum pressure. - No-loss thread on valve ensure accurate pressure remains in shock when removed. - Double-braided hose ensures long-term durability. - Bleed valve for fine-tuning pressure. - 365mm total length. - 185g
$64.99
A dual-purpose suspension fork/rear shock pump with a unique dual-pressure gauge design to facilitate fine-tuning of the unique air pressure requirements for each shock. Eliminates the need for 2 shock pumps. - Lightweight 6063-T6 aluminum construction. - Dual-face gauge ensures accurate pressure for rear (300 psi) or front (110 PSI) shocks. - Accurate to +/- 2 PSI. - No-loss thread on valve ensure accurate pressure remains in shock when removed. - Double-braided extended hose, for repeated use, and long-term durability. - Bleed valve for fine-tuning pressure. - 383mm total length. - 194g
$89.99
A clever track pump that's optimized to work with both low-pressure/high volume (mtb) and also low-volume/high-pressure (road) scenarios - Ingenious dual-stage gauge provides large-scale, high-resolution 0.5PSI-accuracy from 0-30PSI, before converting to regular, lower resolution scale for the remaining 30-160PSI - A must have for any multi-bike household - Stable Steel base & barrel body with a high-strength steel pump shaft and 100cm premium quality hose - Headrush dual-valve connector is compatible with both Schrader and Presta valves without disassembly and built-in bleed valve allows for easy adjustments - Easy view 3 dual-stage gauge - 160PSI maximum pressure - Weight: 1730g
$11.95
For use converting an existing floor pump or inflator to accept Arundel pump heads and Schrader threaded valves. - Nickle-plated brass - Hose clamp required, not included
$19.95
The Woodsman Accessory Pump head - Timeless push-on style - Replaceable grommet - For Presta valves only - Pump head attaches via existing Schrader fitting
$26.95
Gretel Accessory Pump head - Thread-on style - Secure fit - Easy one-handed operation - For Presta valves only. Pump head attaches via existing Schrader fitting
$29.95
Hansel Accessory Pump Head - Thumb lock style. Replaceable grommet - For Presta valves only - Pump head attaches via existing Schrader fitting
$59.95
Pump less, ride more! For use with home or shop compressors, this hand-held inflator is compatible with Presta valves and comes complete with a Woodsman pump head. By use of a clever valve plunger within the Woodsman head, the gauge shows actual tire pressure rather than air hose pressure.
$59.95
Pump less, ride more! A bookend complement to our Presta Shop Inflator, this one is fitted with a clip-on Schrader head. The gauge reads actual tire pressure rather than air hose pressure due to integrated check valve design. Complete with a 2" diaphragm-type gauge for durability, with PSI and BAR graduations. A type 15 industrial interchange male fitting is already installed so it's ready to go, right out of the box.
$69.95
Hansel - Thumb lock style - Replaceable Grommet Gretel - Thread-on secure fit - Easy one-handed operation The Woodsman - Timeless push-on style - Replaceable grommet For Presta valves only. Pump heads attach via existing Schrader fitting.
$44.99
You just want to get on your Batch bike and ride. So, when you need to top off the tires, you want a bike pump that’s easy to use and simply reliable. Good news: Batch makes a bike pump. It has a wide, stable base and an extra-large mounted analog gauge. And it automatically adjusts to fit Presta and Schrader valves. Plus, it has padded handles so you can save all your hand strength for the handlebars. Pump less and ride more with the Batch bike pump. - Head: Automatically adjusts to fit Presta or Schrader valves - Gauge: 160psi with large, easy to read dial - Barrel: Aluminum - Shaft: Aluminum - Handle: Dual density - Height: 28" / 71cm - Weight: 2.9lbs / 1.3kg
$1.75
Don't let your Mammoth 2Stage and Outpost HV pump fall behind. Keep it safe and secure to your bike with our Clip & Strap kit. Compatible with: - Mammoth AnyValve Mini-Pump - Mountain AnyValve Mini-Pump
$2.00
Get your Airstik 2Stage Mini-pump back to new with this rebuild kit.
$2.00
Keep your Blackburn Core Slim/Airstik SL Mini-Pump secure on your bike with this frame mount. Use it to replace a broken mount or to set up multiple bikes to carry your Core Slim or Airstick SL pump.
$2.00
Pick up a spare Blackburn Core/Airstik 2Stage Mini-Pump Frame Mount to replace a broken mount or set up multiple bicycles to easily carry your pump.
$2.00
Service your Mammoth 2Stage Mini-pump and Outpost HV Mini-pump with this rebuild kit. Compatible with: - Mammoth 2Stage Mini-pump - Outpost HV Mini-pump
$3.00
Get your Airstik 2Stage Mini-pump back to new with this rebuild kit. - Compatible with Airstik 2Stage Mini-pump
$3.00
Get your Airstik SL fresh and ready for the ride with its Airstik SL Rebuild kit.
$3.00
Rejuvenate your Blackburn Mammoth Flip Mini-Pump with this rebuild kit and get it back in service quickly.
$3.50
Keep your Airstik SL Mini-Pump where it belongs...on your bike!
$4.00
Broken Air Tower hose? Here's a replacement that will fix that. Compatible with: - 2008-2015 Air Tower 1 - 2008-2015 Air Tower 2 - 2008-2015 Air Tower 3 - 2008-2015 Air Tower 4
$4.00
Local/Central Universal Light Mount replacement strap. Compatible with: - Central 100 Front Light - Central 20 Rear Light - Local 75 Front Light - Local 50 Front Light - Local 20 Rear Light - Local 15 Rear Light - Local 10 Rear Light
$5.00
Keep your Airstik Mini-Pump tightly secured for your ride ahead. Compatible with: - AirStick 2Stage Mini-pump - Outpost Front Rack
$5.00
Keep your Airstik Anyvalve where it belongs...on your bike! - Clip and strap included
$5.00
Anyvalve Pump Head Rebuild Kit - Compatible with Blackburn 2017+ Anyvalve pump head
Page 1 of 16 Next page