BMX

Replacement nylon sleeve for the Cinema C4 peg. - Material: Nylon Composite - Length: 4.33" (110mm) - Diameter: 40mm - Core sold separately

The C4 peg consists of a lightweight 6061-T6 aluminum core with a durable and replaceable 4.33" long nylon sleeve, allowing for smooth grinds on the roughest of ledges. Sold individually as a 14mm peg with a 3/8" adapter. - Material: 6061-T6 Aluminum Core w/Nylon Composite Sleeve - Size: 14mm with 3/8" adapter included - Length: 4.33" (110mm) - Diameter: 40mm - Weight: 5.4 oz

The signature Dak pegs feature a super strong chromoly core and a long-lasting nylon sleeve for smooth grinds on the roughest ledges and rails. The exclusive cog design increases the core's end thickness, making this peg even stronger than traditional plastic pegs while preventing the peg sleeve from rotating at the same time. With Dakota Roche's name on it, you know they can take a beating! Sold individually as a 14mm peg with a 3/8" adapter. - Size: 14mm (3/8" adapter included) - Length: 4.5" or 4.75" - Diameter: 38mm - Weight: 7.6 oz (4.5")

Constructed of 4130 chromoly, these Free Agent pegs are built to withstand long, brutal sessions again and again. - Includes spacers for use on 3/8" axles - Cold-forged - 35mm x 90mm - 14mm non-threaded hole - 3/8" spacers included - Sold in pairs - 200g

These Free Agent pegs are safe for skate park use. - Resin coated for smooth grinding - 14mm non-threaded hole - 3/8" spacers included - 90g - Sold in pairs

The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?.

Designed for use with Kink Incite rear hubs, the Incite Hub Guard is injection molded from a durable nylon material. This hub guard slides directly over the existing hub hardware, so no additional parts or disassembly are required. This guard fits the non-drive side of Kink rear hubs only.

Designed for use with both the Kink East-Coaster and Kink Yukon hubs, the Rear Guard is injection molded from a durable nylon material. This hub guard slides directly over the existing hub hardware, so no additional parts or disassembly are required. This guard fits the non-drive side of Kink rear hubs only.

Designed exclusively for use with the Kink Boulevard front hub, the Boulevard guard is injection molded from a durable nylon material. These guards slide directly over the existing hub hardware, so no additional parts or disassembly are required. This guard can be used on one or both sides of the Boulevard hub, providing protection where you need it.

BMX axles take a lot of abuse, and sometimes they need to be replaced. Kink makes it easy by providing replacement parts like this Incite replacement Incite Axle.

Our updated removable brake mount kit includes everything you need to attach brakes to your Kink frame. This through-bolt style brake mount design fits late 2016 and newer Kink frames, as well as several other popular brand BMX frames. The kit includes brake mounts, brake mount bolts, cable stop, and barrel adjuster. TECH SPECS - Includes: Brake Mounts, Bolts, Cable Stop, and Barrel Adjuster - Features extended bolt-in mounts, fits 2016 and later Kink frames, and fits with most popular BMX brands. - Weight: 1.5oz

If the driver on your Kink Incite hub is getting a little crunchy, rest easy, because Kink has you covered with this replacement Kink Incite Driver 9T. - Choose Left-Hand Drive (LHD) or Right Hand Drive (RHD)

The Kink Myriad Gyro features a fully CNC machined body, made from 6061-T6 aluminum. The low stack design increases cable pull, and the inner nylon bushing provides a smooth, maintenance-free spin. The Kink Myriad gyro uses a knarp-less design and works with most standard gyro cables. TECH SPECS - Material: 6061-T6 Aluminum - Bushing: Smooth nylon - Weight: 1.1oz

The Kink Eastman full guard sprocket was designed to take a beating, and its built-in guard will protect your chain in the process. The machined crank arm reliefs create proper clearance for all popular cranksets, and the guard offset accommodates all chain widths, which gives the Eastman sprocket maximum compatibility. Its technical design creates a clean and symmetric aesthetic and provides massive strength where it’s needed. Two rotation positions extend the life of the Eastman’s built-in guard even further. - Material: Fully CNC Machined 6061-T6 Aluminum - Thickness: 12.5mm Overall (8mm at Spindle) - Compatibility: 19mm, 22mm, and 24mm Spindles - Weight: 5.3oz (25T)

A replacement dual cable stop for bikes with a dual cable gyro setup. Fits most popular frames with removable brake mounts and cable stop. Product Specifications - Type: Single Screw - Includes: Cable Stop and Screw - Weight: 0.5oz

Replacement nylon sleeve for the Mission Targa peg. Sold individually. Product Specifications - Compatibility: Fits Mission Targa Peg Only - Material: Nylon Composite - Weight: 2oz

Clean and simple, this fork cap bolt fits most modern forks on the market. CNC machined from 6061-T6 aluminum, providing strong threads and Allen key slot. This fork cap installs with a common 6mm Allen wrench. - Thread type: M24×P1.5 - Thread Length: 15mm - Weight: 0.7oz

Single screw type removable gyro tabs. Fits most BMX frames with removable headtube gyro tabs. Product Specifications - Type: Single Screw - Includes: 2 Tabs and 2 Screws - Weight: 0.5oz

No frills, affordable, durable, plain and simple. The Mission Strafe pegs are a perfect 4.5" long, and include an adapter for use with 14mm or 3/8" axles. Go get your grind on! - Sold individually - Material: Steel - Weight: 11.0-ounce

The Targa peg features a super sturdy steel core covered in a durable nylon sleeve, allowing for grinds on unwaxed ledges and aluminum rails! Once you've ground through a sleeve, simply slide on a new Targa Peg replacement sleeve and get back to shredding! Sold individually. Product Specifications - Length: 4.5" (114mm) - Diameter: 40mm - Sleeve Material: Nylon Composite - Core Material: Steel - Size: 14mm (3/8" adapter Included) - Weight: 9oz (each)

The Gyro G3 upper top plate is designed for use with the G3 detangler.

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

- Press fit designed to work the hub's non-drive side collar.