24-Inch & Smaller

The ZX 333 front wheel is our most affordable wheel. Featuring our double-wall pin-joint 333 rim, laced 3x to a fully sealed hub with a female axle with 3/8" bolts. All Cinema wheels come with a Cinema rim strip and Cinema hub guards! - Hub: Cinema ZX - Rim: Cinema 333 - Spokes: 36 stainless steel - Weight: 2 lbs 5 oz

If you're after a Wheel designed for your Junior Shredder, then the SPOON 28-24 Wheel is a Perfect Choice. Ideal for Kids' bikes or 24-inch Street Bikes.

The front hub of choice for many riders around the world, we paired our Helix hubs to our Logic rim to make a truly unstoppable front wheel. Hub: WeThePeople Helix front hub Rim: WeThePeople Logic flash welded rim Special Features: - Super high-quality pro-level wheel - Aftermarket-spec WeThePeople Helix hubs - Includes nylon rim tape - Includes full set of nylon/fiberglass hub guards - Includes a second set of cones for use without hub guards

The Kink East-Coaster DTC wheel features the East-Coaster DTC rear freecoaster hub and is laced up to the Kink Atlas II rim. This 36-hole wheel is hand-laced, then tightened and trued to specifications. Its 3x lacing pattern, 14-gauge spokes, and brass nipples provide massive strength to stand up to plenty of riding abuse. All Kink wheels are wrapped with a Kink rim strip to provide excellent protection between the rim and tube. The East-Coaster hub uses a male axle with 17mm nuts.

Tough-yet-affordable single wall rear 20-inch (406mm ISO) coaster wheel that uses a much higher build standard and materials than many original factory-equipped wheels. - Alex Y303 pinned construction single wall rim with 24mm internal width for an excellent pairing with modern high-volume tires - Anodized brake track for clean looks when used with coaster only - KT 305R Nutted 110mm OLD steel coaster hubs w/serviceable cup-and-cone bearings - Compatible w/3-spline coaster hub sprockets; 16T & 18T included for gearing options - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1329g

- RIM: Alex alloy - SPOKES: Steel

Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

- Chrome steel rim - Chrome 16 hole 5/16 hub - Great bike and scooter replacement wheel

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

Rims: WTB ST i23 24" - ETRTO 507-23 - Inner width: 23mm - Disc Brake Only - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Formula DC-20 - QR 9x100mm (Quick Release binder included) - Anodized black with Laser Etched logo - 6-Bolt ISO disc mount - Adjustable bearings - Rubber seal Rear hubs options: Formula DC-22 (QR10x135mm) / DC-2241 (Boost QR 9x141mm) - Quick Release binder included - Anodized black with laser etched logo - 6-Bolt ISO disc mount - Adjustable bearings - Rubber seal - Compatible with 8-11 speed MTB (12 speed HG with 1.85mm spacer, not included) Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- EVO E-Tour 20 24" double wall rim - Silver - Inner Rim Width: 19.8 mm - Rim Height: 16.8 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes

The 888 Freecoaster wheel features the super-strong Cinema 888 rim, laced up to the updated Cinema FX2 freecoaster hub. Hand laced, 3-cross with 14-gauge stainless steel spokes and brass nipples, providing superior strength. This wheel comes standard with a rim strip and both Cinema CR and DR nylon hub guards, making it ready to go out of the box!

Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Rear Wheel - Single Wall rim - Wheel Size: 18-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 355 / 18-inch BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

The 888 FX front wheel features the beastly Cinema 888 rim, laced up to the Cinema FX front hub. Hand laced, 3-cross with 14-gauge stainless steel spokes and brass nipples providing superior strength. This wheel comes standard with a rim strip and Cinema CF nylon hub guards, making it ready to go out of the box!

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

The Kink Boulevard front wheel features the Boulevard hub and is laced up to the Kink Atlas rim. This 36-hole wheel is hand-laced, then tightened and trued to specifications. Its 3x lacing pattern, 14-gauge spokes and brass nipples provide massive strength to stand up to plenty of riding abuse. All Kink wheels are wrapped with a Kink rim strip to provide excellent protection between the rim and tube. The Boulevard hub has a female axle and uses 3/8-inch chromoly bolts.

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 9T - Driver Bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

Durable, stealth all-black BMX wheel spinning on premium sealed cartridge bearings throughout and with a sealed 9T driver. - Pinned construction double-wall rim with a generous 28mm internal width for an excellent pairing with tires up to 2.4 wide - 14mm Cr-Mo male axle rear (sealed bearings all-round) - Anodized black brake track for clean looks when used with brakeless setups - 9T sealed driver - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1289g

The ZX 333 rear wheel is the most affordable wheel in our line. Featuring a double-wall pinned 333 rim laced to a fully sealed cassette with 14mm male axles and 9T driver. All Cinema wheels come with a Cinema rim strip and Cinema hub guards! - Hub: Cinema ZX Cassette - Driver: 9 Tooth - Rim: Cinema 333 - Spokes: 36 stainless steel - Weight: 3 lbs 1 oz

- Taiwan 7x style 36 hole steel rim - Front steel hub uses a 3/8" flatted axle. Compatible with 5/16" forks - Steel wheels use C/N 14G UCP spokes w/ 5/8" brass nipples

Tough-yet-affordable 18-inch (355mm ISO) single wall BMX wheelset that uses a much higher build standard and materials than many original factory-equipped wheels. - Alex Y303 pinned construction single wall rim with 24mm internal width for excellent pairing with modern high-volume tires - Anodized brake track for clean looks - Joytech alloy nutted hubs w/serviceable cup-and-cone bearings - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 758g

Tough-yet-affordable single wall rear 16-inch (305mm ISO) coaster wheel that uses a much higher build standard and materials than many original factory-equipped wheels. - Alex Y303 pinned construction single wall rim with 24mm internal width for an excellent pairing with modern high-volume tires - Anodized brake track for clean looks when used with coaster only - KT 305R Nutted 110mm OLD steel coaster hubs w/serviceable cup and cone bearings - Compatible w/3-spline coaster hub sprockets 16T included - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1152g

Sta Tru Front Wheel - Measures 9-inch across, uses a 12-inch tire - Single Wall Rim - Hub/Brake Compatibility: Rim Brake - ISO Diameter: 203 / 12.5-inch - Front Axle: 5/16-inch x 85mm - Rim Width (Internal): 24 mm - Tire Type: Clincher

Hand-built in Southern California, Box Three Wheels are made with Box One front and rear rims and 36-hole, Box Three Pro Hubs laced 3-cross front and rear with 14-gauge stainless steel spokes and brass nipples. Each wheelset is built with Wheelsmith Spoke Prep and inspected using a DT Swiss tension meter for quality control. Includes both front and rear wheels.

Sta Tru Rear Wheel - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 16-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 305 / 16-inch - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 18-inch - ISO Diameter: 355 / 18-inch BMX - Front Axle: 3/8-inch x 100mm - Tire Type: Clincher