Parts & Accessories

Key features - Original replacement Boa System for your Bontrager Velocis MIPS helmet - Not compatible with any helmets except the Bontrager Velocis MIPS with the Boa System

- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash

Bontrager's LockDown strap dividers are essential for a great fitting, secure helmet. No matter what happens, these original replacements will get them working like new. Key features: - Original replacement strap dividers for your Bontrager helmet - Compatible with all Bontrager helmets equipped with LockDown Straps

Spare visor for Trigger AM helmet, including pins

Add the safety of visibility to your helmet and light up the trail, road, or commute with help from the Bontrager Helmet Mount. Easily attaches a light to most helmets. - Works with all Bontrager Ion and Flare lights

Replacement fit systems keep you comfy and secure Fit systems work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new - Original equipment replacement Boa System for your Bontrager WaveCel helmet - Not compatible with non-WaveCel helmets - Full-length fit system designed for use with Medium and Large sized helmets - Short length fit system designed to optimize the fit of Small sized helmets

Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Helmet buckles work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new. Key features - Original replacement buckles for your Bontrager helmet - Compatible with all Bontrager helmets

Product Details - Original equipment replacement fit pads for Bontrager Lithos helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene

The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)

The replacement lens for your Aerohead helmet featuring premium ZEISS Optics and a choice of either grey (for sunny/mixed conditions) or clear (for low light racing and training). The magnetically fastened ZEISS optical shield provides wraparound eye protection with exceptional optical clarity, and it's easy to flip up or remove with one hand when appropriate.

Thick replacement liner for the Striker helmet

Replacement visor for the Rampage Comp Reno Helmet

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. New pads can also help you dial in the perfect fit - keeping you comfortable and looking forward to the next ride. Key features - Original equipment replacement fit pads for your Bontrager Specter helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm

A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions LED light for Lazer TSPLUS retention system COMPATIBILITY - Tonic MIPS - Tonic - Tardiz2 - Coyote MIPS - Coyote - Chiru MIPS - Next+ - Compact DLX MIPS - Compact DLX - Compact - BATTERY TYPE: CR2032 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: TS+ mechanism - WEIGHT: 12g - MATERIAL: LED light

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Z1 MIPS, Z1 - ATTACHMENT: Z1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad. - COMPATIBILITY: Cameleon MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

A user adjutable cap for the Bullet 2.0 in order to provide airflow or maximize aerodynamics. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet 2.0 helmet - WEIGHT: 34g - MATERIAL: Polycarbonate

Visor for Impala helmet COMPATIBILITY - Impala MIPS - Impala - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon

Change ventilation options with a twist! Choose between aerodynamic performance or up to 11% more ventilation with a rotation of the Twistcap. COMPATIBILITY - Century MIPS - Century - ATTACHMENT: magnetic - WEIGHT: 28g - MATERIAL: Nylon

Screws for Jackal Visor

Replacement visor for the Proframe Helmet.

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. New pads can also help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride. - Original equipment replacement fit pads for your Bontrager Dipper helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new. - Works perfectly with your Bontrager Solstice helmets including Youth models - Original equipment replacement visor

Spare visor and bolts for Trigger FF helmet

Replacement visor for all Andorra helmets.

Mindset 360 fit system provides a secure, customizable fit with 360-degree tension adjustment, five height positions, and an integrated dial for easy, on-the-fly adjustments. - Helmet not included, sold separately